|
Cut fleece to 6" x your desired length plus fringe. I cut mine to
6 x 64" Hoop tear away or ws stabilizer on the bottom, fleece in the
middle and ws topping on top.
I used a tear away on the bottom and Solvy on top |
Measure 5" up from the bottom of the scarf and mark. This is
your hoops center line. Hoop backing, fleece and topping.
Stitch the outer snowflake. Reminder* Change your bobbin
thread to match the top thread. This design looks great on both
the front and back of the scarf |
After the outer snowflake is stitch, add your appliqué fabric,
stitch, trim and stitch again. Hint: - Cut your
appliqué fabric larger than you need. Center your appliqué fabric
and tape in place.
Remove your excess stabilizer.
You are done! |
The tear away comes easily off the back.
I still need to remove a little bit on the outer flake. Using a
pin, those spots will pop right out.
Hint: Add appliqué fabric to the back also.
Repeat the tack down stitch or tape in place and do them both at the
same time. |
